Precautions for placement of rock loader after use

　　The side unloading rock loader used in coal mine is a kind of machinery which can comprehensively complete the excavation, transportation, unloading, filling and leveling. We see a lot of rock loaders in real life. It can be seen that they are widely used. Many people attach great importance to how to correctly use rock loaders, but they don't attach much importance to how to correctly handle rock loaders after use

　　(1) Stop the rock loader at a safe place where there is no loose rock, no dripping water, no collapse of the patio, no damage caused by blasting operation, etc;

　　(2) Reset the control levers, put the boom to the bottom, turn the bucket down and contact the ground;

　　(3) Put the parking lock in the locked position;

　　Side unloading rock loader for coal mine

　　(4) Turn off the power switch and the main power switch. Stop the loader on the flat ground. If it stops on the slope, the wheel must be wedged with triangle wood or stone;

　　(5) When dragging the rock loader, safety chain or steel wire rope shall be added in addition to the normal towing or pull rod. When pulling for a long distance, the driving system shall be disconnected.

　　Hebei Huazhen Coal Mining Machinery Co., Ltd. is located in the high tech Development Zone of Shijiazhuang City, Hebei Province. It is a professional company focusing on underground coal mine and tunnel drilling and tunneling equipment. The company's current products include side unloading rock loader for coal mine, full hydraulic tunneling drilling car for coal mine, tyre tunneling drilling car, excavating loader and other series of products: the company's products have been all over the major coal mines, and are welcomed by the majority of users.